This Deburring External Chamfer Tool quickly repairs any damaged bolts to thread nuts in place once more, saving you time and money. This useful tool simplifies the repair process, potentially fractionalizing repair time, as well as bypassing the need to replace expensive or hard to find hardware while keeping safety at a previously unattainable level.
Deburring External Chamfer Tool works by way of shearing metal layer by layer. So there are some important things to know about using the Deburring External Chamfer Tool.
The most important thing to know is this: THE SLOWER THE BETTER.
Using the lowest speed on your drill (50-400 RPMs), apply decent pressure and the tool will do the rest. Remember that we’re not making metal pencils; We’re removing damaged threads to allow an easy nut start. Remove only the amount of material from the workpiece that you need, and you will preserve the life of your Deburring External Chamfer Tool.
Most repairs only require removing a single thread. The Deburring External Chamfer Tool is a cutter, and just like a drill bit, it will reach the end of life depending on how you use the tool. Slow speed along with no unnecessary cutting and the use of cutting oil or another lubricant will bring your Deburring External Chamfer Tool long life. Refrain from turning every workpiece into a pencil, and you’ll keep the Deburring External Chamfer Tool cutting edge sharp for much longer.
Material: Stainless Steel
Product Size: 2.2 x 1 x 1 inch
Fits Size: 8-32 bolts (.164) up to 3/4″-10 (.750) - (4mm -19mm)
Please allow 1-3cm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed in the pictures.
Ineffective on Chrome-Moly (chromium and molybdenum). Some vehicle lug bolts are made with Chrome-Moly, so please verify that the lug bolt is not Chrome Moly before using the tool.